AS07B41
 
HomePortalCalendarFAQSearchMemberlistUsergroupsRegisterLog in

Share | 
 

 As soon as the Backlight Of The LCD Monitor Has Failed.

Go down 
AuthorMessage
Admin
Admin


Posts : 306
Join date : 2011-09-04

PostSubject: As soon as the Backlight Of The LCD Monitor Has Failed.   Fri Oct 21, 2011 2:41 pm

Find the battery-release latch and press down in it with one hand, and then pull the battery right out the case, setting the laptop computer battery aside.
The convenience offered by the portability of a laptop can
become a hindrance with the screen malfunctions? it isn't easy to
connect a new monitor since you can easily with a desktop procedure. If the backlight
within the LCD screen has was unsuccessful, you can see any image. To fix all the
problem, the entire inverter board and it is connected LCD cable will require
to be manually exchanged. Here below are the instruction for the
reference.
1. Check within the manual of your personal computer or search the infomation from
the Internet to support the portion of the manufacturer抯 websites. Basically
get that what model fo inverter board you will want for your computer, require
my Pavilion DV2000 Display as instance, I search for right one from an established site, HooToo. com, after which you can i fix it by myself.
2. Turn off your laptop抯 operation system. Turned off the LCD screen
motorcycle. CTurn the whole laptop over therefore the bottom end of the result is facing
up towards you. Locate the battery-release latch and press down in it
with one hand, and then pull the battery right out the case, setting the laptop computer battery aside.
3. Locate the rubber pieces about the edges and the top of LCD. Pop the
stopper pieces off the case by inserting a flat object underneath
them after which you can pulling out toward you. Use a screwdriver to take out the
screws hidden beneath stoppers.
4. Put the pc back over and clear the LCD screen support.
Slide a flat along with thin object, such like a screwdriver, directly
underneath the seam from the plastic bezel underneath all the LCD screen.
Wiggle the screwdriver throughout gently until the bezel pops from the
case. Lift the bezel up and be certain if there is some sort of cable running to
any motherboard. Disconnect the cable if there's one.
5. Pull the fact on the screen towards you, and then remove it again from
the laptop. Locate the inverter board in the bottoom of the screen not to mention
find the cable running in the inverter board to this motherboard. Pull
off the strip of tape about the board and remove the screws holding it inside
place if there are any in your particular model of laptop. Disconnect
the cable within the motherboard.
6. Connect the actual motherboard cable for plastic-type material bezel and place all the bezel
back onto the actual laptop case. Finally, just put the battery within the laptop
and power this on, and then when the manufacturer抯 logo appear about the
screen, it mean you happen to be successfull to install the brand new inverter
board and cable television rightly.

Article Tags:
Inverter Snowboard
Back to top Go down
View user profile http://as07b41.createforum.co.uk
 
As soon as the Backlight Of The LCD Monitor Has Failed.
Back to top 
Page 1 of 1
 Similar topics
-
» Minister: Tracey Fay was failed by the State
» Brightest pupils failed by state schools chief inspector warns.
» We've let her down
» Questions that Nick McGuffin and Brent Bartley Failed on Lie Detector Test
» Sun article - EIGHT YEARS ON, HOW 'SUPER SLEUTH' FAILED THE McCANNS plus Express and Sun Articles

Permissions in this forum:You cannot reply to topics in this forum
AS07B41 :: Your first category :: Your first forum-
Jump to: